DECAL 100/140 PCK Μονομερικό Gloss & Matte Αυτοκόλλητο

PRINTING METHODS
- Specially developed for solvent, eco-solvent, latex, UV and UV Gel on large format printing.
- We recommend that latex printing is carried out at a maximum temperature of 105ºC.
- Since the migration of the plasticizer affects the quality of the latex print, Decal only guarantees it for 6
months. After that date the material must be used in solvent, eco-solvent and UV printing.
- This product must be protected with the recommended lamination in order to provide the necessary
strength.
- For the best possible print quality, please make sure you are using the correct print profiles.
- An excessive quantity of ink in the product will result in changes in its characteristics, in inappropriate
drying, lamination detachment and / or poor product performance.
- Inadequate drying can result in curls, wrinkles and adhesion failures, which is reflected in the result of
the material’s performance. A minimum drying period of 48 hours is recommended before any further
processing. Drying should be done with the product unrolled.

APPLICATIONS
- Application surface: flat.
- Substrate not recommended for floor graphics (areas with car traffic); flexible substrates; non-flat surfaces;
carton walls painted or unpainted; plaster walls; wallpaper; unclean or rough surfaces; surfaces with
degraded paint.
- Do not expose to combustible vapors or spills.
- Surfaces on which the material will be applied must be carefully cleaned and free of dust or any other
contamination that may affect the material adhesion.
- Non-vertical application results in a significant reduction in durability, as well as climate and angles of sun
exposure. It is recommended that the film remains at least 24 hours at the temperature of the workplace
before it is used.
- There may be other factors not described here that may influence the performance in the use.